On Saturday, January 3, 2015 11:50:01 AM UTC-5, Frank Whiteley wrote:
On Friday, January 2, 2015 9:52:05 PM UTC-7, WB wrote:
For me, the most miserable glider I've ever flown is the Schweizer 1-36.. Flew a nearly brand new one, thought it horrible. The pitch trim system was the main problem. It was much too powerful and made the stick very heavy.. I chalked it up to being new and tight. Flew a different one thinking it had to be better. Nope just as horrible as the first. A few year later, found the mangled remains of that first 1-36 in a repair shop a long way from where I flew it.

Someone mentioned the TG-2. Flew one of those on a 60 mile ferry tow. If you think the 72 mph redline made cross country soaring tough, what about flying the thing for 60 miles on tow behind a towplane that could not tow that slow? I was never so happy to get to a reasonable bail-out altitude. The split ailerons on this one had been covered as single units and would bind a bit, resulting in limited movement and poor roll control. No rudder pedal adjustments and a fixed seat made for a very cramped seating position. However, after reaching the destination at 5000 agl, I found that the thing would spin and recover very well due to that huge rudder.

I think Kirk mentioned the Schweizer 1-23. The D models and later are probably the best gliders Schweizer ever built in serial production. One of my favorite flights of all time was in a 1-23D. Climbed the upwind side of a tall cu from it's 5000' base all the way to 8000' agl, then flew the cloud street like a ridge for an hour. Also had my first outlanding in a 1-23H15.

After looking at the rigging and construction of the root assembly of 1-36, I decided I'd rather not fly one. Those few that did fly the one we had for a few years always seemed to be on the verge of PIO's on take off. AFAIK, only one instructor ever flew it. Perhaps what you describe resulted in a tendency to over control. I always though it looked twitchy.

Frank Whiteley

I would be curious as to what about the construction of the 1-36 root concerned you.
My experience is that the pitch sensitivity of the 1-36 is not any poorer than that of a 1-26. That said, I do prefer the 1-34 over the 1-36.
FWIW
UH