At 19:29 23 April 2015, wrote:
The "let go of the stick" part is probably a souvenir of the period (some
5=
0 years ago) when gliders had airbrakes that kept the speed below Vne
even
=
in a vertical dive (this used to be specified in the standard class
rules,
=
before the Libelle/Cirrus/ASW-15 generation came up - see the Schweizer
sto=
ries about vertical dive test flights). The technique you found in many
gli=
ding (teaching) manuals was indeed: "trim fully forward, airbrakes fully
op=
en, let go of the stick and rudder". At least here in Europe.

With modern gliders, the Vne limit will be reached long before a vertical
d=
ive position even with airbrakes fully deployed (I seem to remember that
a
=
30=B0 dive is sufficient with some open class self launchers or fully
balla=
sted gliders). So it is probably common sense to try to hold the stick
stea=
dy in pitch after trimming forward.

Benign spiral does work in most gliders. It involves trimming the glider to
say 55kts and then making sure that you do NOT move the stick against the
trim, in other words you maintain neutral stick input. It is a technique
that will allow you to descend through cloud if you do not have blind
flying instruments. A few important caveats. It would be difficult if not
impossible to set up while in cloud, the idea is that you set up while
clear of cloud. The original concept was to recover if the cloud gaps
closed beneath you, NOT if you are already in cloud. The other caveat is
that if you have given your airframe a really cold soak, when you descend
into the cloud you will pick up ice, clouds tend to have moisture, which
may be a complete game changer.