Thats interesting that your firmware update worked, mine didnt. I
received "SENSOR BOX ERROR" after the update and now everytime
on startup, and now the SC switch doesnt do anything, whereas
before it mimicked whatever the last button press was. So thats a
step forward in that the switch doesnt do random things now.

You mention the SC wire- which one is that? My stick only came with
4 coloured wires and a PTT wire.

I had the S80 settings correct i believe.

Vario Parameters-Auto SC is set to off
Hardware - Vario is set to Taster. (I also tried it in "Remote"
setting, no change)

Cheers,

Neil


At 06:35 26 January 2016, ZP wrote:
Firmware fix has been provided and working. Unfortunately, you
won't be
ab=
le to have automated setting AND the momentary switch at the
same time. I
=
thought it might be good to have is auto-change based on
airspeed, but
then=
use the momentary switch as an 'override' button (i.e. switch it
back to
c=
limb). Doesn't work that way. The momentary switch will be the
only way
t=
o change modes with the exception of the "vario priority" signal.
The
vari=
o priority signeal will overrride the current setting and always
change
the=
mode to "vario".