I should have been more clear. There are two types of "sleeves" used for L'Hotellier (pronounced "leh-hotel-e-ay") fittings.

- Uerling sleeves referred to above as "White LS Sleeves". These are plastic, only work on straight L'Hotellier fittings and have to be replaced every two years. Simple to install as they just snap into place.

- Wedekind sleeves. These are metal (aluminum and steel parts), work on both straight and right-angle L'Hotellier fittings and are a permanent solution. Difficult to install as you have to 1) remove the push tubes with L'Hotellier fittings from the glider, 2) remove the L'Hotellier fittings from the push tubes (be SURE to measure the overall length beforehand!), 3) figure out the documentation 4) *CAREFULLY* measure, fit and then drill a single hole, 5) reinstall everything, and 6) try not muck up the alignment of the control surfaces. Still, it was worth it.

My $0.02. Best of luck.

John (OHM)