Thread
:
Pin holes (again)
View Single Post
#
10
April 10th 17, 01:02 AM posted to rec.aviation.soaring
Michael Opitz
external usenet poster
Posts: 318
Pin holes (again)
At 22:26 09 April 2017,
wrote:
Would someone share what is the PPG Concept paint color code
refinishing
shops use. I assume there is no ASW-24 or Discus white! Thank you
How big an area do you need to paint? As opposed to going through
all of the pain and expense of the 2 part epoxy gel-coats and paints,
I have opted to use Duplicolor Auto Lacquer spray bombs to paint small
touch up areas. The color that I have found best matches the older
Schwabelack on our Twin Astirs is Ford Performance White at about $8
per spray can. I use some primer first, and then 4-6 thin coats of the
lacquer, making sure it is tack dry in between coats to avoid runs.
Once the last coat is dry, I'll wet sand with 600-800-1000-1500-2000
and then buff to a high gloss. It may not be an absolute perfect
match, but it is pretty quick and easy, and I have found that the color
matches pretty darn closely..... I can totally re-do small areas from
start to finish in just a few hours.
RO
Michael Opitz
View Public Profile
View message headers
Find all posts by Michael Opitz
Find all threads started by Michael Opitz