View Single Post
  #19  
Old November 7th 17, 04:31 PM posted to rec.aviation.soaring
WB
external usenet poster
 
Posts: 236
Default ASW 20 Handling Issues?

On Tuesday, November 7, 2017 at 9:59:38 AM UTC-6, Mike the Strike wrote:
I owned WA - Wally Scott's ASW20 for a number of years. It was a while before I discovered he had secreted large amounts of lead in the wings and tail and that the W&B data was completely fictitious. I can confirm that with a CG well aft of the factory permitted range it can depart into a spin quickly and viciously!

With the lead removed and the CG returned to the permitted range, I never experienced another problem. There were reports of a tendency to spin when the "Jesus" landing flap position of early ASW20s was selected, but this again was not a problem I encountered.

Mike


I think the departures that occur in the "Jesus" landing flap position result from pilots realizing too late that they are coming up short and getting too slow in an attempt to make the landing area. My advice to new 20a drivers: If you are going to use full landing flap, don't aim for the near end. Choose a touchdown point in the middle of your chosen landing area!