On Apr 7, 12:31*pm, steve wrote:
Hi all, sorry for my english.
I'm a new owner of an asw19b.
I ordered the TN11 kit to add the second blade to the airbrakes.
If i try to mount the blade of the kit with the supplied screws,
blades have an enormous play on the vertical axis because there ale a
pair mm between the blade and the threaded mount that attaches around
the arm of the airbrake.
Is possible to have some detailed photo of the kit installation.
Thanks
Stefano

We went through this last year. It took a bit of head scratching to
get it all
to fit properly. Note that the two wings are mirror images of each
other
so it's possible to put things on wrong. Also, it's a good idea to
install
the fillet in the spoiler box before you try attaching the blade -- if
you don't
it's VERY easy for the blade to get caught under the lip and quite
difficult
to free it! Also, you may have to fabricate a connector for the blade
to
be bolted to the arms. This was shown on the plans but it wasn't in
my
part kit -- I'm not sure if they were there originally or not, but we
had
to make them from aluminum stock and flush rivet them to the blades.

When I get to the airport I'll try to get some photos of the completed
airbrakes, but I'm not sure when I'll get there.

-- Matt