View Single Post
  #26  
Old September 18th 04, 12:55 AM
Mike Rapoport
external usenet poster
 
Posts: n/a
Default


wrote in message
...
In rec.aviation.owning Mike Rapoport wrote:
The Caravan has a 940hp engine flat rated to 675hp. Turbines are
typically
flat rated so that the engine can make rated power to reasonable
altitudes
and temperatures without having to design the gearbox for the full
thermodynamic horsepower. To keep the comparison with piston engines
apples
to apples you need to use thermodynamic ratings.


http://www.pwc.ca/en/3_0/3_0http://w.../3_0_2_1_2.asp


OK, that explains that.

To put some numbers on things, the engines in my MU-2 have a specific
fuel
consumption of .55lb/hp/hr and a piston engine is about .45 and diesels
can
be under .40. Huge (ship) diesels can be under .30. Compare your model
aircraft engines with the TFE731-60 used on the Falcon 900EX which uses
.405lb/lb thrust/hr


Aha, numbers!

So if one assumes the motivation to switch from a piston to a turbine is
the price of gas is roughly twice Jet-A, the crossover point would be a
turbine that did about .8 (to allow for the weight difference in the
fuels).

Any idea how small (in appropriate terms of hp) current technology can
make
a turbine with that consumption?


--
Jim Pennino


That would be the economic crossover point if the engines cost the same. Of
course a plane that needed twice the fuel (in lbs) to achieve the same
performance wouldn't have much useful load or range.

Mike
MU-2