Roger wrote:
On Tue, 02 Jan 2007 15:36:10 -0500, Michael Horowitz
wrote:

Someone used masking tape many years ago to cover some screwheads on
my leading edge. Pulling it off only gives me strips of masking tape.

Any suggestions on how to remove this stuff? - Mike

I've used both Acetone and Mineral Spirits to remove the old, dried
adhesive. It takes a bit of elbow grease too. 100 MPH tape is worse
than masking tape.


MEK should take it off... but you might need an old toothbrush at some point too..