Cliff

Set your rotary Mic switch on the left side of the unit to Com1. Place the
Auto toggle switch down, leave the Com1 switch in the neutral position, and
place the Com2 switch down............down being the "Phone" position. This
setup allows for send/receive on Com 1 and receive on Com2.

Joe


"Cliff" wrote in message
. ..
I have a KMA20 installed with 2 KX175B's. Where do I set the
AUTO,COM1,COM2
toggle and rocker switches? I do have a 4P intercom and speakers. I would
like to set COM1 as primary and COM2 on 121.5 for monitor.

Thanks
Cliff