On Friday, June 5, 2015 at 9:59:09 AM UTC-5, Morteza Ansari wrote:

At 08:01 05 June 2015, Morteza Ansari wrote:
I just upgraded my Oudie from 6.21 to 6.41 and it finished without a
proble=
m. After the upgrade was done, Seeyou Mobile won't start. I tried
everythin=
g I could think of without any luck. I even tried to do the upgrade again
w=
ith the same version 6.41 upgrade file and the upgrade fails with error:
"C=
annot find executable for version info".

Any ideas, suggestions? I am supposed to head out for a long weekend of
so=
aring in 7 hours and this is my main and only navigation/waypoint
informati=
on. You can bet I am kicking myself for doing this last minute, but I
have
=
been doing these upgrades for almost 10 years without a single problem
unti=
l now.

Any suggestions/ideas? I wouldn't even mind reseting the whole device to
f=
actory defaults. I have a backup of my configuration and can restore the
XM=
L file if I get the device working again.


Morteza, I had the same problem, solved by manually upgrading. Here is the text from the email that the Oudie guys sent me, it has a link to allow you to get the update file directly:

This is a quite usual problem, perhaps it has something to do with antivirus or firewall corrupting executable files. I guess its more of a download problem, anyway our developers will figure it out.

In the mean time you can manually update your Oudie2. Here are the instructions:

Upgrading the firmware on the Oudie is as simple as downloading one file, saving it in the root of your Oudie's Resident Flash memory and resetting the Oudie.

To Update the firmware on your manually Oudie please follow this procedu

Follow this link for 6.40 version of Oudie2: http://download.naviter.com/oudie/UpdateOudie.exe
Download the update file UpdateOudie.exe to your PC (if you are saving directly to Oudie, then skip to step #5). Make sure about the file's name on your computer. See "Common problems" below.
Connect your Oudie with PC using the USB cable which was supplied in the box
You should now see Oudie as an external Mass Storage drive on your PC (named TFAT)
Copy UpdateOudie.exe to the root of your Oudie drive (TFAT)
Reset Oudie or press and hold the On/Off key for 1 second and select "Power off". Then power it back on by holding the button for another second.
Wait until it boots into an Update dialog box
Press "Update" and wait until the process is finished
Reboot the Oudie one more time, then it is updated.


COMMON PROBLEMS:

- File name when copied to Oudie must be exactly "UpdateOudie.exe". Windows or browsers sometimes add "(1)", "(2)" or similar making the filename "UpdateOudie (1).exe". Such file will not work on Oudie. You must manually rename it to "UpdateOudie.exe" if your browser/windows changed it during the download process.

- Oudie is in Active Sync mode rather than Mass Storage mode. Turn the Oudie on then exit SeeYou Mobile by pressing Menu Next Exit. Once you are on the black main screen press "" button in the upper right corner, then select "USB". Make sure that "Mass Storage" is enabled and press the "Save" icon. Intentionally we are not posting instructions how to use Oudie in Active Sync mode. If you want to use it in Active Sync mode fine, but you have to know what you are doing

Good luck,

Kirk
66