On Wed, 14 Mar 2007 09:42:22 -0500, "Stan Prevost"
wrote:


"Stan Prevost" wrote in message
. ..

This all sounds familiar, like it has come up before. I don't remember
how it was resolved, and it is too late to dig through TERPS to try and
figure it out. I'm going to bed. :-) Maybe tomorrow will google the ng
for KPQI.


This thread is why it sounded familiar: http://tinyurl.com/2uv32k

If the FAA calculates the angle from the FAF to the threshold crossing
altitude (or the TDZE), then the numbers on the KPQI chart don't work out.
If the distance is reduced by 0.3 nm per Jepp, the numbers seem OK. But
that's not shown on the NACO chart.

It works out pretty close using descent from PESIC to threshold crossing
altitude.

Stan




Well, the calculated slope from LISDE to PESIC is about 2.94°


Ron (EPM) (N5843Q, Mooney M20E) (CP, ASEL, ASES, IA)