"Doug Haluza" wrote in message
ups.com...
But most important, you need to install tubing clamps over the barbs.
Without clamps, the tubes will leak. The best ones are the mini
stainless steel pinch clamps (you can crimp these with an end nipper
set of pliers). You can also use the nylon wraparound clamps, which are
reusable. Tie-wraps are not suitable because they leave a gap at the
right angle bend.

Doug:
Do you have a brand name or source of supply for these?
Quick Google search does not yield the product you describe.
Thanks


Hartley Falbaum