wingman1985 wrote:
Mechanical System Functional Test
Open the cargo compartment door and verify that the PFW Aerospace AG
CLS has been installed in accordance with PFW installation drawing
BX900023.
1) Lower the door sill protector (if applicable) and raise the
anti-roll-out
2) Check all cargo Locks to ensure they are in the retracted position
3) Check all cargo Latches to ensure they are in the right position for
XX.Y"
wide ULDs
4) Orient the loaded test ULD for position E outside the aircraft,
XX.Y" laterally anti-roll-out


So can any one tell me what is "anti-roll-out"?




Hooks, ledges or eye-bolts intended to prevent mobile cargo moving.

Brian W