On Thursday, October 17, 2019 at 12:15:05 PM UTC-7, Ian Kennedy wrote:
To save re-inventing the wheel, whats the best way of securing the oxygen
bottle within its fitting in an LS3?
Any suggestions welcome.
TIA
Ian K

The LS3 and 4 had a clamp which screwed into the bulkhead and used a bolt to hold the E or AL682 cylinder in place.
Don't know if the Aerox cylinder bracket (available online) will fit.
If you don't have abracket, a swaged wire rope loop around the neck of the cylinder and a "maillon rapide" (quick link) or similar to attach it to a forged eyebolt through the bulkhead works well. Best to either use coated wire or sleeve it with instrument tubing.
Jim