At 05:36 17 November 2018, Mike C wrote:

Lead shot/epoxy slurry mix can be molded into about any shape and is
relati=
vely easy to source. Used it to make tail weights for my RS15.

Also lead wool can be found in hardware stores and is easily melted with
a
=
propane torch.

Mike (4)

In the UK one can buy lead flashing from the builders merchant. This is a
roll of thin lead sheet about 6 inches wide. Just fold it several times
lengthwise into a paperback shaped weight, wrap with duct tape and drop it
in the slot. About ten minutes work.