View Single Post
  #6  
Old November 23rd 03, 09:43 AM
SouthBayGuy
external usenet poster
 
Posts: n/a
Default

Thanks for your reply, glatherm:

Well no it won't fly straight and level, really. Without the A/P I am
constantly having to readjust power/trim, and still find myself climbing or
descending about 300fpm. It's either my poor skills as a sim pilot after all
these years, or none of the joysticks i've tried will calibrate exactly
correct on this computer of mine. I still tend to think it's a combination
of my lousy flying and the default flight models and whatever bugs are
present in FS9. I'm tending to believe what I do about the flight models
because I got the "Perfect Flight General Aviation Adventures" add on from
the internet the other day (because it has a citiation in it) and although
the graphics on the planes and panel's aren't up to MS, the planes handle
much better.

Thanks for the tip on the Mooney I'll try it!

Regards to all

"glathrem" wrote in message
...
If you turn AP off and center the joystick, will it fly straight and

level?
Sounds like the AP is compensating for a slightly down stick. I have the 3
axis sidewinder and it works fine, except that FS9 pushes buttons on it's
own occasionally. I do see the quick turbulence bump you have once in a
while. That Mooney Bravo is a bummer. It won't fly straight unless you
continuously switch fuel tanks. It only draws fuel from one tank at a time
and quickly becomes unbalanced enough to turn. Would be a really nice

plane
except for that. My system is not much better than yours; 1.8ghz, Nvidia
64mb (geforce4), XP sp1, 512 ram...... I most of the time maintain 20FPS
with most sliders maxed out (the sliders important to me anyway).


"SouthBayGuy" wrote in message
link.net...
Hello Everyone:

I was hoping that someone with more experience than I could help me with
some questions/problems that I have with MS Flight Sim 2004. I have

owned
all of the FS since 4.0, and the one that has worked best for me has

been
2002. A couple of weeks ago, I got 2004, and am quite happy with it as

an
"upgrade," more for the "little things" (more choices in ATC, better

GPS,
etc), but have had some problems that are either brand new, or seem to

have
gotten worse in this version.

First, my system;
Compaq 1.6 GHz Pentium 4
512 mb RAM 433mhz bus
80gb 7200 EIDE HDD 80gb Maxtor external HDD (USB)
NVIDIA Geoforce 2MMX 64MB video (yeah yeah, I know)
Windows XP Home SP1 with all the lil "patches"
Saitek Cyborg EVO Joystick

This system can run FS2004 fairly well, good frame rate, not the best
scenery detail of course, but I use FS mostly as a recreational thing,

to
do
the flying that I cant afford, and am not skilled for yet, in R/L. I

have
taken some flight training in the past, it's been a long time ago, but I

do
know what it's like to fly a real 182, etc. With my older video card

I've
found that the best thing to do is leave it at whatever the program puts

at
the defaults--that gives the best performance for me.

Now, to the issues:

1. Rudder control-Both my joysticks (I also have the MS Sidewinder 2.0

that
frankly I'm disappointed with), have twist for rudder. It is VERY

DIFFICULT
to taxi, to keep the plane on the taxi line and even more difficult to

track
the center on take off and landing rolls. This occurs in all planes but

is
worse in the Mooney Bravo. Is this just part of the flight model, .cfg

file,
whatever? I don't want to invest in custom rudder controls and have the

same
problem..that would be very depressing! Also once in the air, the planes
especially the light gen av aircraft, wander a bit as far as heading

(the
Mooney is worst at this).

2. Auto Pilot Problem-Now THIS is the thing that is frustrating. When

I'm
flying any of the lighter aircraft, really anything other than the
airliners, when the A/P is set for altitude it keeps the trim so nose

high,
the airplane can't pass 80 knots or so. This is especially bad in the

172
182 and Mooney. The twins do it to an extent; it doesn't really happen

in
the jets because you can set the A/P to maintain IAS. Is there ANY way

to
stop the A/P from setting the trim so nose high? I've also noticed that

when
flying along in A/P that periodically the plane will suddenly act like

it
was hit by a gust (even with wind turned off), slip, raise and fall a

bit,
then try to go back to the heading and altitude (and of course roll the
elevator trim way high! UGH!).

The Mooney for seem reason, just seems downright unflyable. Am I doing
something wrong, do I have to alter a config file or something? It just
seems, from my limited real piloting experience, that real aircraft are
about 20 times easier to control. Anyway thanks so much for taking the

time
to read my post. I would appreciate any help or advice anyone could

give.

Thanks!