On 15 Jul 2003 05:54 PM, Capt. Doug posted the following:

I have a steel tank that leaves a bit of rust in the filter. Will
sloshing the tank solve the rust problem? If so, what compound do you
recommend for steel and should it be etched with anything beforehand?

Try this:

http://www.eastwoodco.com/aspfiles/i...3071523462854&
T1=10165+Z&Dep_Key1=

I used a similar product to etch/seal the tank for my three wheeler (atv)
and have been very happy with the results.

----------------------------------------------------
Del Rawlins-
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/