PowerFLARM USB 3 cables and ConnectMe to PowerFLARM through V7
Per posts on the Naviter site, I thought this was supposed to be fixed and working with the latest version of Oudie firmware (4.40). Though I am still getting the "external error (-9)" error when actually trying to download.
On Tuesday, June 4, 2013 8:31:16 PM UTC-7, Paul Remde wrote:
Hi Tim,
The Oudie and V7 would work with the PowerFLARM for flight log downloads,
except the PowerFLARM doesn't support that feature yet.
Best Regards,
Paul Remde
Cumulus Soaring, Inc.
_________________________________________
"Tim Taylor" wrote in message
...
Two comments/questions:
1. I had purchased a panel mount extension USB cable to allow me to plug the
USB drive into the panel for upgrades and flight downloads. I didn't think
anything about the cable type but after doing the install I can not download
flights. I started looking at the cable and realized it is USB 3 (labeled
SSUSB with Blue tabs). I realized PowerFLARM did not work with USB 3 drive
but never thought about checking the extension cable type as well.
2. Will ConnectMe on an Oudie work with a PowerFLARM through a V7? I can
see the serial number but it will not access the flights. Would be nice if
we could use that in the future to download flights.
|