Aaron Coolidge wrote:
: You need to use isolation diodes on all lines from the Narco transponder
: to the encoder, and from the GPS to the encoder. If you don't do this, the
: GPS will read the encoder incorrectly.

That's not quite true. So long as the power is on for both of them,
they'll both read fine. The problem is when power's turned off on either,
to grounds all the lines for the other.


You'll also need pull-up resistors
: on the outputs of the encoder.

This shoulnd't be necessary, unless either the KLN-89B or AT50 are
very weird. All the transponders and GPSs I've dealt with have their own
pullup internally. They're all open-collector outputs and have their own
rail.

-Cory

--
************************************************** ***********************
* The prime directive of Linux: *
* - learn what you don't know, *
* - teach what you do. *
* (Just my 20 USm$) *
************************************************** ***********************