Louis,
Would you happen to have any pictures? If so, perhaps you could post them
to alt.binaries.pictures.aviation. I'm finding pictures of the mod very
hard to come by.

Thanks,
Jim

"Louis L. Perley III" wrote in message
oups.com...

Jim Burns wrote:
Ronnie, Kyler and other Aztec owners, if you are interested in the STC
to
modify your lower engine cowls, keep reading. The mod cuts the bottom
cowl
in front of the air box, then installs a row of cam locks for easy cowl
removal. No more lying on your back with feet and arms extended trying
to
support the whole lower cowl while two other people remove the screws!
There are two versions of the STC available, the contact numbers are
below.
I have the abbreviated plans and install instructions for one version,
let
me know if you want the PDF file.

Aztec Nomad Inc. 1201 Gravenhurst Parkway, Gravenhurst, ON Canada P1P
1R1
Email Address: Phone705) 687-6696 Fax705)
645-3914

NTM Aviation, 3870 Davis Rd, McNeal, AZ 85617, USA | phone:520-642-9280
|
fax:520-642-9336
Contact us: about NTM Aviation

Jim

I have this STC on my Aztec, and it's wonderful. It had already been
done when I bought it, but it does make working on things quite a bit
easier. The problem I have (goes for the top cowl as well) is making
sure I get the right cam lock back in their proper locations. Because
my airframe is so old, there are a couple of spots where a longer cam
lock is used to keep things in shape.

--
Louis L. Perley III
N370 @ 48V