Thanks Paul for the additional information. To be honest the whole model of how PowerFlarm handles logfile copying seems at best to be a hack! As such the next best alternate solution would be to let Oudie handle it. As of right now I don't have the USB port brought to the front of my panel and given how the USB stick copying of log files work, I really would prefer not to do that. I want to have some level of control (like every other device!) on what files get copied and when they get copied rather than plug the USB stick, power cycle and get ALL the logs...

Given that, I would really want to get either FlarmView or the Oudie to handle this with the right interface. And yes, that would mean using the serial port to transfer a file, but at the high baud rates on the line and given you typically transfer a single file, it shouldn't be too bad. Certainly much better than the alternate (IMO)!

I hope the PowerFlarm folks are listening and add the missing feature soon. It has been frustrating at times to be on the bleeding edge and waiting for things to get to working state...


On Wednesday, June 5, 2013 10:25:01 PM UTC-7, Paul Remde wrote:
Hi Morteza,



The problem isn't with the Oudie. As stated below, it is that the

PowerFLARM doesn't yet support fight log downloads through the serial port.

They must be done using a USB Flash Drive (PowerFLARM Core) or microSD

memory card (PowerFLARM Portable). Once FLARM updates the software to allow

flight log downloads through the serial port, then the Oudie will probably

be able to download flight logs from it - assuming they use the same flight

log transfer protocol used by previous FLARM units



But why would you want to wait for several minutes for a flight log download

through the serial port when using a memory device will get the job done in

5 seconds? I recommend that you try using a memory card.



Best Regards,



Paul Remde

Cumulus Soaring, Inc.

____________________________



"Morteza Ansari" wrote in message

...



Per posts on the Naviter site, I thought this was supposed to be fixed and

working with the latest version of Oudie firmware (4.40). Though I am still

getting the "external error (-9)" error when actually trying to download.





On Tuesday, June 4, 2013 8:31:16 PM UTC-7, Paul Remde wrote:

Hi Tim,







The Oudie and V7 would work with the PowerFLARM for flight log downloads,



except the PowerFLARM doesn't support that feature yet.







Best Regards,







Paul Remde



Cumulus Soaring, Inc.



_________________________________________







"Tim Taylor" wrote in message



...







Two comments/questions:







1. I had purchased a panel mount extension USB cable to allow me to plug

the



USB drive into the panel for upgrades and flight downloads. I didn't

think



anything about the cable type but after doing the install I can not

download



flights. I started looking at the cable and realized it is USB 3 (labeled



SSUSB with Blue tabs). I realized PowerFLARM did not work with USB 3

drive



but never thought about checking the extension cable type as well.







2. Will ConnectMe on an Oudie work with a PowerFLARM through a V7? I can



see the serial number but it will not access the flights. Would be nice

if



we could use that in the future to download flights.