In article
,
A Lieberma wrote:

Last allotment of my T6 videos. Kinda saved the best for last.

http://www.youtube.com/watch?v=Rc2cua16euk

The focus of this video is the tightness of the formations and the
precision

All shots were with the camera were zoomed out and as you can see I
could barely get one plane in the picture, that was how tight the
formations were.

Note the precision of the bank angles of the planes and how they
mirror each other. For the two ship formation toward the end of the
video, note the bank angle of number two with the elevator of the
plane I was in (lead) showing the precision of the formation

Standard separation is 3 ft down (wingtips), 3 ft back (nose to tail),
establish your spots on your wingman to maintain a 45 deg angle. The
spots usually a aileron inboard trailing edge to wing TE and some
distinguishing mark on the fuselage, like a step, cowl latch, paint
stripe intersection with a door post, etc.

Remember -- if you can't see your wingman's head, he can't see you, so
you are out of position (usually sucked). In turns, you maintain
relative position, always keeping the spots aligned.

Throttle is your most important control.

--
Remove _'s from email address to talk to me.