Looks like about 5/16 for #6


"flybynightkarmarepair" wrote in message
oups.com...

Michael Horowitz wrote:
MS24593 is a flat head machine screw with a 6-32 shank/thread. In this
application the diameter of the screwhead is important.

I went to HD and bought a 6-32 machine screw to see what length I
needed (the original having rusted beyond recognition). I compared the
HD screw with the MS and noticed it was 1/4" dia. as compared to 3/8",
so I'm wondering if I order the MS screw if the head will be large
enough.

The difference I'm seeing is caused by the 100^ angle on the MS screw,
but I don't know if the final diameter will match the original.

Would anyone with experience with the MS24593 screw please weigh in? -
Mike

http://assist.daps.dla.mil/quicksear...t_number=40617

Rev C has the complete dimensional specs.