In rec.aviation.owning Mike Rapoport wrote:
The Caravan has a 940hp engine flat rated to 675hp. Turbines are typically
flat rated so that the engine can make rated power to reasonable altitudes
and temperatures without having to design the gearbox for the full
thermodynamic horsepower. To keep the comparison with piston engines apples
to apples you need to use thermodynamic ratings.

http://www.pwc.ca/en/3_0/3_0http://w.../3_0_2_1_2.asp

OK, that explains that.

To put some numbers on things, the engines in my MU-2 have a specific fuel
consumption of .55lb/hp/hr and a piston engine is about .45 and diesels can
be under .40. Huge (ship) diesels can be under .30. Compare your model
aircraft engines with the TFE731-60 used on the Falcon 900EX which uses
.405lb/lb thrust/hr

Aha, numbers!

So if one assumes the motivation to switch from a piston to a turbine is
the price of gas is roughly twice Jet-A, the crossover point would be a
turbine that did about .8 (to allow for the weight difference in the fuels).

Any idea how small (in appropriate terms of hp) current technology can make
a turbine with that consumption?


--
Jim Pennino

Remove -spam-sux to reply.