Earlier, tpjunk (Jibpilot) wrote:

The wheels on most Eberle trail are the
same as the Op[e]l Kadet, If you should
see "Kadet" stamped on you rims some where.

If that's true, the bolt pattern should be 4 on 100mm (3.93"). My
suggestion would be to go to that list I posted, pick out all the
rear-wheel-drive cars on it, and get wheels from one of those. The
front-wheel-drive cars will probably have more offset (or backspacing,
depending on how you measure) than you want.

Let us know how this works out.

Thanks again, and best regards

Bob K.
http://www.hpaircraft.com