April 2nd 04, 07:13 AM
|
|
interesting thought..
worth a check..
BT
"dave" wrote in message
news:R14bc.57542$K91.139268@attbi_s02...
Is there a chance that the throttle cable is loose somewhere allowing it
to buckle then release?
That could really suck if you were powered down on final and needed to
do a go-around!
Just a thought.
Dave
James M. Knox wrote:
"O. Sami Saydjari" wrote in news:106n16goaaj8933
@corp.supernews.com:
Today, after I started by Turbo Arrow III (TCM TSIO-360-FB), I set
throttle to 1000 RPM (as normal). The engine sound a little "funny".
About 60 seconds later, the engine roared to 1700 RPM on its own and I
had to pull the throttle back quite a bit to get back to 1000 RPM.
Run-ups, later on, seemed fine.
Could be a lot of things, but I'm guessing it's as simple as a couple of
plugs (on different cylinders) being damp, or maybe a couple of lifters
slow to pump up. Mine tends to do the same thing, although usually only
for about 10 seconds.
Right now, I wouldn't worry about it. If you start having problems with
the runup, or other indications of less than full power available - OR
it
starts to take longer and longer to "settle down" then it needs to be
checked. But at the moment it doesn't sound (purely personal opinion
here)
like anything of concern.
-----------------------------------------------
James M. Knox
TriSoft ph 512-385-0316
1109-A Shady Lane fax 512-366-4331
Austin, Tx 78721
-----------------------------------------------
|