"mm" wrote:

You clearly don't know anything about ground resonance. It has little or
nothing to do with the blade tip Mach number.

I don't pretend to be a fully articulated hub expert, but this is not
something I made up. It comes from an FAA inspector who makes his
living flying all sorts of helicopters. He IS an expert. Are YOU an
FAA inspector? Are you qualified to say that he is mistaken?

Think about the word "resonance". Do resonance and frequency go hand
in hand? By increasing the rotor RPM, do you increase the frequency
of rotation? Of course you do, its the same thing. If you sing a
perfect pitch into a tuning fork, does it also vibrate at resonance?
Yes. If you sing at a non-resonant frequency, does it still vibrate?
No. Are marching soldiers told to break step when crossing a bridge?
Yes. Why? Resonance. Think about this and what ground resonance
actually is.

Before you say this guy doesn't know anything about what he does for a
living, I suggest that you think about it a little while.

Dennis.



Dennis Hawkins
n4mwd AT amsat DOT org (humans know what to do)

"A RECESSION is when you know somebody who is out of work.
A DEPRESSION is when YOU are out of work.
A RECOVERY is when all the H-1B's are out of work."
To find out what an H-1B is and how they are putting
Americans out of work, visit the following web site
and click on the "Exporting America" CNN news video:
http://zazona.com/ShameH1B/MediaClips.htm