I just had a Garmin 340 audio panel installed in my 310. The avionics shop
said that there would be interference between the two if the coms were split
and suggested not enabling that feature. I took their suggestion. I am
very pleased with the audio panel but that would have been a nice feature.


"O. Sami Saydjari" wrote in message
...
Does anyone out there have experience with Garmin's 340 audio panel and
its feature that lets you split the Com 1 and Com 2 so that the pilot
can talk/receive on one while the co-pilot can talk and receive on a
separate frequency on another? It is called the "Com 1/2" button.
On my installation, the co-pilot experienced that Com 2 reception was
blocked with I was talking on Com 1. That is not how it is supposed to
work. I have been told by one avionics shop that it is difficult to not
have Com1/Com2 interference and that I should just write-off this
feature. Another shop said that the Com 1 and Com 2 antenna's had to be
relocated so that they were on opposite sides of the plane (one op top
and one on bottom). I am not sure what to believe at this point. Any
advice or experience that folks have had would be appreciated.

-Sami
N2057M Piper Turbo Arrow III



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.562 / Virus Database: 354 - Release Date: 1/16/2004