A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Belly Cleaning...?



 
 
Thread Tools Display Modes
  #1  
Old June 16th 04, 01:34 AM
zatatime
external usenet poster
 
Posts: n/a
Default Belly Cleaning...?

Hi,

I'm looking for ideas on how to best clean the belly of my plane.
It's a Cherokee and is pretty greasy/grimy/dirty underneath. I'm
hoping to find something I can buy from a non-aviation source (like a
supermarket or auto parts store), and it would be Great if I didn't
need any water.

TIA for any responses.

z
  #2  
Old June 16th 04, 02:07 AM
Kyle Boatright
external usenet poster
 
Posts: n/a
Default


"zatatime" wrote in message
...
Hi,

I'm looking for ideas on how to best clean the belly of my plane.
It's a Cherokee and is pretty greasy/grimy/dirty underneath. I'm
hoping to find something I can buy from a non-aviation source (like a
supermarket or auto parts store), and it would be Great if I didn't
need any water.

TIA for any responses.

z


Get an automotive creeper and a package of a dozen cotton cloths. Next, get
some nitrile gloves to protect your skin. After that, you need a solvent.
I'd recommend either mineral spirits, which is smelly, but gentile on paint,
or one of the solvents auto body shops use as a final wipe-down prior to
painting an auto. You can usually find these solvents at a good auto paint
store. A quart of the stuff lasts a long time...

Then, put on the gloves, dampen a cloth in your chosen solvent, climb on the
creeper, and have at it. Shouldn't take more than 5-10 minutes. Oh, and
wear safety glasses. If the solvent doesn't drip into your eye, you're sure
to poke an eye out with an antenna or something.

KB


  #3  
Old June 16th 04, 02:22 AM
Jay Masino
external usenet poster
 
Posts: n/a
Default

Kyle Boatright wrote:
Get an automotive creeper and a package of a dozen cotton cloths. Next, get
some nitrile gloves to protect your skin. After that, you need a solvent.
I'd recommend either mineral spirits, which is smelly, but gentile on paint,
or one of the solvents auto body shops use as a final wipe-down prior to
painting an auto. You can usually find these solvents at a good auto paint
store. A quart of the stuff lasts a long time...


Then, put on the gloves, dampen a cloth in your chosen solvent, climb on the
creeper, and have at it. Shouldn't take more than 5-10 minutes. Oh, and
wear safety glasses. If the solvent doesn't drip into your eye, you're sure
to poke an eye out with an antenna or something.


This is similar what I do, except I often use a large terry cloth towel
that I'm willing to throw out. I wipe down large sections using paper
towels and mineral spirits, then wipe if off with the terry cloth towel.
The entire belly takes about 15 minutes.


--
__!__
Jay and Teresa Masino ___(_)___
http://www2.ari.net/jmasino ! ! !
http://www.oceancityairport.com
http://www.oc-adolfos.com
  #4  
Old June 16th 04, 03:28 AM
Newps
external usenet poster
 
Posts: n/a
Default


"Kyle Boatright" wrote in message
...

Get an automotive creeper and a package of a dozen cotton cloths. Next,

get
some nitrile gloves to protect your skin. After that, you need a solvent.
I'd recommend either mineral spirits, which is smelly, but gentile on

paint,
or one of the solvents auto body shops use as a final wipe-down prior to
painting an auto. You can usually find these solvents at a good auto

paint
store. A quart of the stuff lasts a long time...



Bah, do that if you want all that labor. Get the non pumice GoJo and a
paintbrush. Paint it on, let sit for awhile and hose it off.


  #5  
Old June 16th 04, 08:13 AM
Dude
external usenet poster
 
Posts: n/a
Default

Isn't that stuff a thick delimolene solution? sorry if I butcherred the
spelling.

There are several citrus degreasers on the market, is this stuff okay to use
on aircraft auto paint?


"Newps" wrote in message
...

"Kyle Boatright" wrote in message
...

Get an automotive creeper and a package of a dozen cotton cloths. Next,

get
some nitrile gloves to protect your skin. After that, you need a

solvent.
I'd recommend either mineral spirits, which is smelly, but gentile on

paint,
or one of the solvents auto body shops use as a final wipe-down prior to
painting an auto. You can usually find these solvents at a good auto

paint
store. A quart of the stuff lasts a long time...



Bah, do that if you want all that labor. Get the non pumice GoJo and a
paintbrush. Paint it on, let sit for awhile and hose it off.




  #6  
Old June 16th 04, 10:18 PM
Mark
external usenet poster
 
Posts: n/a
Default

"Newps" wrote in message ...
Bah, do that if you want all that labor. Get the non pumice GoJo and a
paintbrush. Paint it on, let sit for awhile and hose it off.


He did say no water if possible
  #7  
Old June 16th 04, 03:08 PM
Marco Leon
external usenet poster
 
Posts: n/a
Default

Can anyone verify that mineral spirits is safe on aluminum?

Marco


"Kyle Boatright" wrote in message
...

"zatatime" wrote in message
...
Hi,

I'm looking for ideas on how to best clean the belly of my plane.
It's a Cherokee and is pretty greasy/grimy/dirty underneath. I'm
hoping to find something I can buy from a non-aviation source (like a
supermarket or auto parts store), and it would be Great if I didn't
need any water.

TIA for any responses.

z


Get an automotive creeper and a package of a dozen cotton cloths. Next,

get
some nitrile gloves to protect your skin. After that, you need a solvent.
I'd recommend either mineral spirits, which is smelly, but gentile on

paint,
or one of the solvents auto body shops use as a final wipe-down prior to
painting an auto. You can usually find these solvents at a good auto

paint
store. A quart of the stuff lasts a long time...

Then, put on the gloves, dampen a cloth in your chosen solvent, climb on

the
creeper, and have at it. Shouldn't take more than 5-10 minutes. Oh, and
wear safety glasses. If the solvent doesn't drip into your eye, you're

sure
to poke an eye out with an antenna or something.

KB





Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
  #8  
Old June 16th 04, 10:10 PM
G.R. Patterson III
external usenet poster
 
Posts: n/a
Default



Marco Leon wrote:

Can anyone verify that mineral spirits is safe on aluminum?


Yes. It's used constantly in parts washers and for cleaning engines. The shop at
Kupper used to buy it in 55 gallon drums.

George Patterson
None of us is as dumb as all of us.
  #9  
Old June 16th 04, 11:54 PM
Matthew P. Cummings
external usenet poster
 
Posts: n/a
Default

On Wed, 16 Jun 2004 10:08:44 -0400, Marco Leon wrote:

Can anyone verify that mineral spirits is safe on aluminum?


My Cessna's owners manual says to use Stoddard solvent to clean it with,
Stoddard Solvent is Mineral Spirits.

  #10  
Old June 16th 04, 02:22 AM
Matthew P. Cummings
external usenet poster
 
Posts: n/a
Default

On Wed, 16 Jun 2004 00:34:02 +0000, zatatime wrote:

I'm looking for ideas on how to best clean the belly of my plane.
It's a Cherokee and is pretty greasy/grimy/dirty underneath. I'm


Stoddard Solvent or Mineral Spirits and a rag.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cleaning up brushes/dope? Michael Horowitz Home Built 5 June 23rd 11 02:11 AM
B-17 Belly Landing-How much damage? Matt Wiser Military Aviation 0 May 8th 04 10:28 PM
World War II-era B-17 makes belly landing THE ASSOCIATED PRESS Otis Willie Military Aviation 0 May 7th 04 03:02 AM
Belly Landing Emilio Military Aviation 12 November 26th 03 06:41 PM
P-47/51 deflection shots into the belly of the German tanks,reality ArtKramr Military Aviation 131 September 7th 03 09:02 PM


All times are GMT +1. The time now is 02:19 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.