![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
The first episode of Monster Garage in which Jesse James forms a team
to build an airplane out of a Panoze sports car occured last night. Unlike just about all the previous episodes I've seen, this team had a lot of people. Rather than save a bit of time by scavenging a set of wings, they actually built their own. One of the engineers designed an airfoil and they cut out templates, bolted metal between the templates and slapped it and hammered it into flanged rib pieces. They rushed some material over to a local machine shop to bend up the spars, then riveted doublers onto the cap strips and riveted the nose pieces, middle and tail pieces to the spars. Lots of people working and a lot of work. In three or four days, they had a wing assembled. It's impressive, but as usual I felt that the effort was wasted on a joke vehical. One of Jesse's concepts is that everything the teams build is supposed to look basically stock, but do these ridiculous stunts. In this case he insisted that the aircraft engine be concealed until needed then be raised for action. This is creating friction between a number of workers. The guy who is the "chief" aerodynamics engineers told Jesse that if he wanted this thing to fly, the engine had to be fixed in place, none of this raise or lower it stuff. Besides, there's a huge tube extension that has to be built for the tail plane that isn't going to be retracted, it's welded in place. Jesse, for his part, had little to add to the chaos, as building an airplane is way out of his league. He did have a suggestion as to using a tool that made bending the rib material over the formers, a slapper, but the one suggestion he made to having a rib cut so that the material that required shrinking was eliminated from the blank turned out to be a dud. The material cut out of the rib was exactly the material needed for riveting, and the engineers told him so. He just shrugged, as did everyone else, they all went back to bending metal. The engine turned out to be an 0-320 out of a hurricane damaged airplane. 150 hp. Corky Scott |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Homebuilt Aircraft Frequently Asked Questions (FAQ) | Ron Wanttaja | Home Built | 0 | October 1st 04 02:31 PM |
Homebuilt Aircraft Frequently Asked Questions List (FAQ) | Ron Wanttaja | Home Built | 0 | September 2nd 04 05:15 AM |
Could Canada Build | Charles Talleyrand | Military Aviation | 22 | July 11th 04 10:05 PM |
Air Force radios jam garage door openers THE ASSOCIATED PRESS | Otis Willie | Military Aviation | 1 | May 21st 04 01:13 PM |
[Fwd: Why I'll never build a kit plane.] | Corky Scott | Home Built | 16 | July 28th 03 01:56 AM |