Cable parts needed in Dallas

Hi all,

I am looking for a place in dallas to get the following parts
AN667-2 or MS20667-2
and
AN666-2 or MS21259-2

I figured some of you home builders have some good contacts!

Any Ideas?

Thanks

Dave

Not in Dallas proper, but try Tex-Air Parts in Fort Worth, close to Meacham
Field, or in Addison, on Ratliff Lane. They usually have these in stock.
www.texair.com.

"dave" wrote in message
newsExkb.827850$uu5.145660@sccrnsc04...
Hi all,

I am looking for a place in dallas to get the following parts
AN667-2 or MS20667-2
and
AN666-2 or MS21259-2

I figured some of you home builders have some good contacts!

Any Ideas?

Thanks

Dave

I think Dave is close to Addison, so TexAir Addison may have what he
needs if he wants to pay airplane/Jaguar prices. Otherwise, Elliott's
may be the key.

Wed, 22 Oct 2003 04:22:26 GMT, "Juan.Jimenez"
wrote:

Not in Dallas proper, but try Tex-Air Parts in Fort Worth, close to Meacham
Field, or in Addison, on Ratliff Lane. They usually have these in stock.
www.texair.com.

"dave" wrote in message
newsExkb.827850$uu5.145660@sccrnsc04...
Hi all,

I am looking for a place in dallas to get the following parts
AN667-2 or MS20667-2
and
AN666-2 or MS21259-2

I figured some of you home builders have some good contacts!

Any Ideas?

Thanks

Dave

Thanks all,
I ended up ordering them from Wicks.

Now I need to find a place that can swedge them while on the airplane.

There is some room in the wheel wells of the old bonanza.
I can get it done in Ft Worth if I fly the airplane stiff legged there.

It looks like a real pain in the a$$ to pull out the housing and all.

Any suggestions?

Stu Gotts wrote:
I think Dave is close to Addison, so TexAir Addison may have what he
needs if he wants to pay airplane/Jaguar prices. Otherwise, Elliott's
may be the key.

Wed, 22 Oct 2003 04:22:26 GMT, "Juan.Jimenez"
wrote:


Not in Dallas proper, but try Tex-Air Parts in Fort Worth, close to Meacham
Field, or in Addison, on Ratliff Lane. They usually have these in stock.
www.texair.com.

"dave" wrote in message
newsExkb.827850$uu5.145660@sccrnsc04...

Hi all,

I am looking for a place in dallas to get the following parts
AN667-2 or MS20667-2
and
AN666-2 or MS21259-2

I figured some of you home builders have some good contacts!

Any Ideas?

Thanks

Dave

Where is the aircraft now? If it's anywhere near Ft Worth call Al Heasley,
his cellphone is 817-691-8217, office is 817-490-7855. He's based out of
Northwest Regional (52F) but he travels all over the place and does
_outstanding_ work. I'm sure he can take care of what you need done.

"dave" wrote in message
news:wuElb.1970$Fm2.4519@attbi_s04...
Thanks all,
I ended up ordering them from Wicks.

Now I need to find a place that can swedge them while on the airplane.

There is some room in the wheel wells of the old bonanza.
I can get it done in Ft Worth if I fly the airplane stiff legged there.

It looks like a real pain in the a$$ to pull out the housing and all.

Any suggestions?

Stu Gotts wrote:
I think Dave is close to Addison, so TexAir Addison may have what he
needs if he wants to pay airplane/Jaguar prices. Otherwise, Elliott's
may be the key.

Wed, 22 Oct 2003 04:22:26 GMT, "Juan.Jimenez"
wrote:


Not in Dallas proper, but try Tex-Air Parts in Fort Worth, close to
Meacham
Field, or in Addison, on Ratliff Lane. They usually have these in stock.
www.texair.com.

"dave" wrote in message
newsExkb.827850$uu5.145660@sccrnsc04...

Hi all,

I am looking for a place in dallas to get the following parts
AN667-2 or MS20667-2
and
AN666-2 or MS21259-2

I figured some of you home builders have some good contacts!

Any Ideas?

Thanks

Dave