See You Mobile Declared Task Pilot Name

If see you mobile was registered to someone else and they are letting you borrow their PDA for a badge flight, the name attached to the registration is what gets declared to any other devices linked up (Cambridge 302 for example).

I can enter a separate pilot in the Cambridge 302/303 but I don't want a task declared through to the 302/303 with a different name from see you mobile. Does anyone know a good solution to this one?

Thanks
Wade

Buy your own copy of See You Mobile!


At 05:58 07 May 2013, Wade wrote:
If see you mobile was registered to someone else and they are letting you
borrow their PDA for a badge flight, the name attached to the
registration
is what gets declared to any other devices linked up (Cambridge 302 for
example).

I can enter a separate pilot in the Cambridge 302/303 but I don't want a
task declared through to the 302/303 with a different name from see you
mobile. Does anyone know a good solution to this one?

Thanks
Wade

Użytkownik Wade napisał:

I can enter a separate pilot in the Cambridge 302/303 but I don't want a task declared through to the 302/303 with a different name from see you mobile. Does anyone know a good solution to this one?
Use ConnectMe.


--
WojtuÅ›

For the flights that matter? - hand written declaration every time. Would
you trust your diamonds to gadgets?

At 05:58 07 May 2013, Wade wrote:
If see you mobile was registered to someone else and they are letting you
borrow their PDA for a badge flight, the name attached to the
registration
is what gets declared to any other devices linked up (Cambridge 302 for
example).

I can enter a separate pilot in the Cambridge 302/303 but I don't want a
task declared through to the 302/303 with a different name from see you
mobile. Does anyone know a good solution to this one?

Thanks
Wade

Hi Pete,

I don't use written declarations. I've never had a problem in 15 years with
electronic declarations for many badge and record flights. If it is done
correctly it is extremely reliable.

Best Regards,

Paul Remde
________________________________

"Pete Startup" wrote in message
...

For the flights that matter? - hand written declaration every time. Would
you trust your diamonds to gadgets?

At 05:58 07 May 2013, Wade wrote:
If see you mobile was registered to someone else and they are letting you
borrow their PDA for a badge flight, the name attached to the
registration
is what gets declared to any other devices linked up (Cambridge 302 for
example).

I can enter a separate pilot in the Cambridge 302/303 but I don't want a
task declared through to the 302/303 with a different name from see you
mobile. Does anyone know a good solution to this one?

Thanks
Wade

At 05:58 07 May 2013, Wade wrote:
If see you mobile was registered to someone else and they
are letting you
borrow their PDA for a badge flight, the name attached to
the
registration
is what gets declared to any other devices linked up
(Cambridge 302 for
example).

I can enter a separate pilot in the Cambridge 302/303 but I
don't want a
task declared through to the 302/303 with a different name
from see you
mobile. Does anyone know a good solution to this one?

Thanks
Wade


I'm going to stick my neck out and say that your initial premise
that it is the registered SYM name that is sent to the logger with
the declaration is wrong. Copied and pasted from the SYM
manual section on task declaration:

"After the communication is established, the following data is
transferred automatically
to the flight recorder:
Declared task in SeeYou Mobile which you have entered in
Menu Task
Glider information which is entered in Menu Settings Polar
(glider type) and Menu Settings Log
(glider registration)
Pilot name as entered in Menu Settings Log"

So, if the manual is correct, all you should have to do is alter
the pilot details to your own in Menu/Settings/Log for your
badge flight and remember to change them back to the owner's
when you return the PDA.

John Galloway

At 16:20 07 May 2013, John Galloway wrote:
At 05:58 07 May 2013, Wade wrote:
If see you mobile was registered to someone else and they
are letting you
borrow their PDA for a badge flight, the name attached to
the
registration
is what gets declared to any other devices linked up
(Cambridge 302 for
example).

I can enter a separate pilot in the Cambridge 302/303 but I
don't want a
task declared through to the 302/303 with a different name
from see you
mobile. Does anyone know a good solution to this one?

Thanks
Wade

My previous posting got truncated as it crossed the Atlantic so
here is the complete version.

I'm going to stick my neck out and say that your initial premise
that it is the registered SYM name that is sent to the logger with
the declaration is wrong. Copied and pasted from the SYM
manual section on task declaration:


"After the communication is established, the following data is
transfered automatically
to the flight recorder:

Declared task in SeeYou Mobile which you have entered in
Menu/Task

Glider information which is entered in Menu/Settings/Polar
(glider type) and Menu/Settings/Log (glider registration)

Pilot name as entered in Menu Settings Log"

So all you should need to do is enter your own information as
described before declaring the task and remember to change it
back to the owner's before returning the PDA to him.

John Galloway

As far as I know you cannot change the pilot name from the name that see you mobile is registered to. I will eventually buy my own copy of see you mobile but for right now I am a youngster who is very fortunate to have someone who is willing to let me borrow their airplane and instruments in that airplane to chase my first badge.

Thanks
Wade

On Tuesday, May 7, 2013 9:20:23 AM UTC-7, John Galloway wrote:
At 05:58 07 May 2013, Wade wrote:

If see you mobile was registered to someone else and they

are letting you

borrow their PDA for a badge flight, the name attached to

the

registration

is what gets declared to any other devices linked up

(Cambridge 302 for

example).



I can enter a separate pilot in the Cambridge 302/303 but I

don't want a

task declared through to the 302/303 with a different name

from see you

mobile. Does anyone know a good solution to this one?



Thanks

Wade





I'm going to stick my neck out and say that your initial premise

that it is the registered SYM name that is sent to the logger with

the declaration is wrong. Copied and pasted from the SYM

manual section on task declaration:



"After the communication is established, the following data is

transferred automatically

to the flight recorder:

Declared task in SeeYou Mobile which you have entered in

Menu Task

Glider information which is entered in Menu Settings Polar

(glider type) and Menu Settings Log

(glider registration)

Pilot name as entered in Menu Settings Log"



So, if the manual is correct, all you should have to do is alter

the pilot details to your own in Menu/Settings/Log for your

badge flight and remember to change them back to the owner's

when you return the PDA.



John Galloway

On 09/05/2013 06:03, Wade wrote:
As far as I know you cannot change the pilot name from the name that see you mobile is registered to.
I will eventually buy my own copy of see you mobile but for right now I am a youngster who is very
fortunate to have someone who is willing to let me borrow their
airplane and instruments in that airplane to chase my first badge.

Thanks
Wade


If you use ConnectMe I believe you can change the name. It uses
the same files as SYM on the PDA, just a few more steps to do
it this way.


--

Nick Hill

Have you tried following the instructions in the manual to
change the pilot name, glider details and polar - then exit and
save the profile? My registered SYM is happy to accept Mickey
Mouse being named as the pilot - it just adds another name to
the drop down list in Menu/Settings/Log.


At 05:03 09 May 2013, Wade wrote:
As far as I know you cannot change the pilot name from the
name that see
yo=
u mobile is registered to. I will eventually buy my own copy of
see you
mob=
ile but for right now I am a youngster who is very fortunate to
have
someon=
e who is willing to let me borrow their airplane and
instruments in that
ai=
rplane to chase my first badge.

Thanks
Wade

On Tuesday, May 7, 2013 9:20:23 AM UTC-7, John Galloway
wrote:
At 05:58 07 May 2013, Wade wrote:
=20
If see you mobile was registered to someone else and
they=20
=20
are letting you
=20
borrow their PDA for a badge flight, the name attached
to=20
=20
the
=20
registration
=20
is what gets declared to any other devices linked up=20
=20
(Cambridge 302 for
=20
example).
=20

=20
I can enter a separate pilot in the Cambridge 302/303
but I=20
=20
don't want a
=20
task declared through to the 302/303 with a different
name=20
=20
from see you
=20
mobile. Does anyone know a good solution to this one?
=20

=20
Thanks
=20
Wade
=20
=20
=20

=20
I'm going to stick my neck out and say that your initial
premise=20
=20
that it is the registered SYM name that is sent to the logger
with=20
=20
the declaration is wrong. Copied and pasted from the
SYM=20
=20
manual section on task declaration:
=20
=20
=20
"After the communication is established, the following data
is=20
=20
transferred automatically
=20
to the flight recorder:
=20
Declared task in SeeYou Mobile which you have entered
in=20
=20
Menu Task
=20
Glider information which is entered in Menu Settings
Polar=20
=20
(glider type) and Menu Settings Log
=20
(glider registration)
=20
Pilot name as entered in Menu Settings Log"
=20
=20
=20
So, if the manual is correct, all you should have to do is
alter=20
=20
the pilot details to your own in Menu/Settings/Log for
your=20
=20
badge flight and remember to change them back to the
owner's=20
=20
when you return the PDA.
=20
=20
=20
John Galloway