Loading TP to Garmin 396

Does anyone have any experience of loading Turnpoint Exchange turnpoint
files to the Garmin 396? If so what utility and what file format did
you use?

My previous experience is with a Garmin 95XL using the Garmin PCX5
software.

thanks


Andy

..wpt is for garmin is it not ?

http://soaring.aerobatics.ws/TP/ASA/files.html

Andy wrote:
Does anyone have any experience of loading Turnpoint Exchange turnpoint
files to the Garmin 396? If so what utility and what file format did
you use?

My previous experience is with a Garmin 95XL using the Garmin PCX5
software.

thanks


Andy

..wpt. I've used Gartrip for many years. www.gartrip.de Works with
Garmin and Magellan receivers.

Chip Fitzpatrick

http://www.garmin.com/support/collec...t=010-00425-00

Andy wrote:
I downloaded Gartrip but it won't connect to my 396. Mapsource will
connect so it's not a problem with the PC, GPS, cable, or USB driver.

Mapsource (supplied with the 396) does not appear to accept .wpt files.
It only imports MPS or GDB files and these are not supported by
Turnpoint exchange.

So, once again, has any one actually loaded turnpoint exchange files to
a Garmin 396? If so what PC utility did you use and what file format
was used.

thanks


Andy

Andy,

did you check the comm ports on your pc? And you must set the GPS unit
to the Garmin-Garmin protocol that you would use to transfer data
between Garmin units.

Of course my new PC has no serial ports and I now have to look into
USB/serial converters. Anyone have any recommendations?

Chip F

Thanks for the tip Kirk. I tried it but it won't communicate either.
Mapsource uploads and downloads to the 396 just fine but other apps
seem to have com port problems.

PCX5AVD that used to work on this PC doesn't anymore, perhaps due to an
OS "upgrade" to XP home.

Andy

Update - was able to get both Gartrip and G7toWin to download from the
396 this morning. Don't know what the problem was before but it seems
to have been fixed by a PC reboot (or two).

Thanks for the tips on suitable applications.

Andy

Andy wrote:
Does anyone have any experience of loading Turnpoint Exchange turnpoint
files to the Garmin 396? If so what utility and what file format did
you use?


This all turned out to be a non-problem. I have found that the Garmin
provided utility Mapsource will open the old PCX5 format waypoint
files. So the 396 can be loaded with garmin pcx5 files that are already
available on tp exch.


Andy

I suspect there are very few 396's being used for soaring but was
browsing Garmin for an update to Mapsource and found this

"Changes made from version 6.7 to 6.8.0:

* This will be the last version of MapSource to support
reading/importing PCX5 files. For future compatibility, please migrate
your data to the GPX format."


I have version 6.5. Current version is 6.10.2

Back to G7toWin.

Andy