A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Piloting
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Windmilling and electrical power



 
 
Thread Tools Display Modes
  #11  
Old February 7th 07, 06:13 PM posted to rec.aviation.piloting
Dallas
external usenet poster
 
Posts: 541
Default Windmilling and electrical power

On Wed, 07 Feb 2007 17:34:15 +0100, Mxsmanic wrote:

if you have a single, you'll
probably be on the ground before the battery goes dead, one way or another.


Why on the ground one way or another? A prop single can fly all day with a
dead battery and alternator.
--
Dallas
  #12  
Old February 7th 07, 06:18 PM posted to rec.aviation.piloting
Mxsmanic
external usenet poster
 
Posts: 9,169
Default Windmilling and electrical power

Dallas writes:

Why on the ground one way or another? A prop single can fly all day with a
dead battery and alternator.


Not if the engine isn't running. If the propeller is windmilling, presumably
the engine is dead.

--
Transpose mxsmanic and gmail to reach me by e-mail.
  #13  
Old February 7th 07, 10:08 PM posted to rec.aviation.piloting
Capt. Geoffrey Thorpe
external usenet poster
 
Posts: 790
Default Windmilling and electrical power

"Mxsmanic" wrote in message
...
...
It seems odd to me that the very people who complain about my posts here
would double the apparent traffic from them by pretending to be me.
Perhaps
Ms. Nowak has peers on this newsgroup.


You, sir, owe Ms. Nowak an apology for compairing her to the scum sucking
trolls that have infested this group.

--
Geoff
The Sea Hawk at Wow Way d0t Com
remove spaces and make the obvious substitutions to reply by mail
When immigration is outlawed, only outlaws will immigrate.


  #14  
Old February 7th 07, 10:26 PM posted to rec.aviation.piloting
Tony
external usenet poster
 
Posts: 312
Default Windmilling and electrical power

Don't fall for this. MS is impersonating himself -- what a wonderful
scam!

..

On Feb 7, 5:08 pm, "Capt. Geoffrey Thorpe" The Sea Hawk at wow way
d0t com wrote:
"Mxsmanic" wrote in message

...
...

It seems odd to me that the very people who complain about my posts here
would double the apparent traffic from them by pretending to be me.
Perhaps
Ms. Nowak has peers on this newsgroup.


You, sir, owe Ms. Nowak an apology for compairing her to the scum sucking
trolls that have infested this group.

--
Geoff
The Sea Hawk at Wow Way d0t Com
remove spaces and make the obvious substitutions to reply by mail
When immigration is outlawed, only outlaws will immigrate.



  #15  
Old February 8th 07, 12:04 AM posted to rec.aviation.piloting
Kev
external usenet poster
 
Posts: 368
Default Windmilling and electrical power

On Feb 7, 12:00 pm, Mxsmanic wrote:
It seems odd to me that the very people who complain about my posts here
would double the apparent traffic from them by pretending to be me. Perhaps
Ms. Nowak has peers on this newsgroup.


The fakes are easy to spot. They include this line from the dizom
anonymous remailer:

Mail-To-News-Contact:

To get rid of them, you need to contact dizum and tell them your email
is being misused:

"Dizum FAQ [13] Q: What is your policy on forgery?

"A: We have a policy against a user of Dizum making posts in a way
that uses the email address of another user on Usenet or the Internet,
in an attempt to deceive readers of the true identity of the poster,
without that email address owner's permission. In addition, if you are
the victim or witness to a forgery, you may want to contact the
appropriate law enforcement agency so they may then contact us and
follow-up as they feel appropriate. If you feel that your email
address is being forged and you do not want to make use of the Dizum
mail2news gateway nor the Dizum remailer we can add that address to
the blockfile. This will disable any postings with that from line. "


  #16  
Old February 8th 07, 12:54 AM posted to rec.aviation.piloting
Mxsmanic
external usenet poster
 
Posts: 9,169
Default Windmilling and electrical power

Kev writes:

The fakes are easy to spot. They include this line from the dizom
anonymous remailer:

Mail-To-News-Contact:

To get rid of them, you need to contact dizum and tell them your email
is being misused:


Hmm ... now who here would know about anonymous remailers?

--
Transpose mxsmanic and gmail to reach me by e-mail.
  #17  
Old February 8th 07, 06:59 AM posted to rec.aviation.piloting
Mxsmanic
external usenet poster
 
Posts: 9,169
Default Windmilling and electrical power

Nomen Nescio writes:

-----BEGIN PGP SIGNATURE-----
Version: N/A

iQCVAwUBRcrCopMoscYxZNI5AQE0DQP8D/NnWzDoO3w+kI1zs+oerCqWOB/4/00o
OEqyFe19cKfLry4Wj8hmgtRhV6NhXWkitCbzJjtrNxzNaq0sOC GmUlZxgR0JIETx
LxWZH3JmeMuOCOjbzmx5VAk2nCfHNDYXsvPnI0unz6XlVTOXCb qo9ppS4CN8nYsg
RtrV/6hjvj0=
=JFlx
-----END PGP SIGNATURE-----


Where is your public key? It's not on the standard servers.

--
Transpose mxsmanic and gmail to reach me by e-mail.
  #18  
Old February 8th 07, 07:01 AM posted to rec.aviation.piloting
Mxsmanic
external usenet poster
 
Posts: 9,169
Default Windmilling and electrical power


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Mxsmanic writes:

Gee. I hope they don't verify that the address is really mine.
That wouldn't work too well.


It's easy to forge a sending address, but it's impossible to
simulate intelligence, so I do have that working in my favor.


-----BEGIN PGP SIGNATURE-----
Version: PGP 8.0.2

iQA/AwUBRcrKrRv8knkS0DI6EQK75ACbBVNYPCcGoYj+NbwdNmnOyX LSdf8AnR2w
Wx4rrTkrxdbOvxpAcMcrSAAN
=PwxV
-----END PGP SIGNATURE-----


--
Transpose mxsmanic and gmail to reach me by e-mail.
  #19  
Old February 8th 07, 07:52 PM posted to rec.aviation.piloting
Mxsmanic
external usenet poster
 
Posts: 9,169
Default Windmilling and electrical power

Nomen Nescio writes:

I've posted it a couple of times, here.
Check the dashes at the beginning and end of the block. Sometimes (don't
know why) it goes through with a dash & space added (- -----) when it should be
(-----). Just delete the dash & space before adding it to your ring.
Then, of course, check it against a previous post to verify that it came
from me.


Well, actually I was hoping for a separate source for the key. A public key
posted in a USENET post isn't very useful for verifying a USENET post, since
it's not an out-of-band source.

In my case, my public key is on my Web site, so anyone can download it and at
least be sure that whoever signs my USENET messages also controls my domain
and Web server, which is a pretty good indication that I am who I claim to be.

I think my public key is also on a couple of servers, but I'm not sure (the
servers themselves don't always strike me as very stable).

It's always a good idea to put a PGP sig on your posts. Headers can
be forged. But if someone is duplicating a PGP sig.......They're probably
NSA.


Signing things that don't need to be signed is an unnecessary security risk.

I had someone try to impersonate me on another group about 6 months
ago. The idiot copied my PGP sig from another post I made. When I
exposed the fraud, someone else verified that the sig was corrupt and
that the post was a forgery. Once you put your sig on something, every
word, sentence, space, and comma is set in stone and tied to you, alone.


Yup.

Did you file a complaint with Dizum M2N, yet?


No. I'm not convinced that it's that big a deal. People who are smart enough
to care about whether or not it's really me are also smart enough to spot
impersonations--just the style of writing alone gives it away. And those who
aren't smart enough don't matter.

--
Transpose mxsmanic and gmail to reach me by e-mail.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fly-By-Wire Flight Controls Charles Talleyrand Piloting 52 December 28th 05 10:27 PM


All times are GMT +1. The time now is 10:34 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.