![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#2
|
|||
|
|||
![]()
On Sat, 13 Dec 2003 01:23:06 -0600, "BoscoBob"
wrote: :I am looking to start a homebuilt project in 2004. My new career keeps me at :home with much free time during the day, and a two-car garage at my :disposal. : :I have researched many different companies and aircraft ![]() :up my mind to go with an RV-9A. : :My dilemma is that I know next to nothing about homebuilding and aircraft :engines. It seems that to start building an aircraft, that you need to know :which engine (not an auto conversion) and which instruments will go into the :aircraft before starting (leaning towards the BMA EFIS/One). Is there any :literature that would make the process of choosing go any easier? I have :read almost everything I can and everyone seems to have an opinion. I am :looking for factual information to help me make the correct choices. My :first (correct?) choice was to look for a plane which suited the type of :flying that I would be doing and that I felt that I could complete. You've done VERY well so far. You can't go wrong with the RV. But you're not correct about needing to decide on engine and instruments now. As long as you're sticking with the Lycoming (a good choice, certainly the lowest risk way to go) the only decision is O-235 or O-320. They go on the same engine mount and cowl. Virtually the entire engine installation will be the same, except for the prop. You can decide between the two when you get the airframe done, or any time between now and then. As for avionics - put them off until the VERY last minute. 10 years ago GPS barely existed. Since then Terra and Trimble, Magellan have gone, Garmin has become the top dog, color moving map IFR coms are commonplace. There will be a LOT of changes in the next 3 years. The best box you can buy today will be marginally obsolete by then - useful, but not what you'd really want to buy. The best advice I can give is buy every fast build option you can, then enjoy the process of building. |
Thread Tools | |
Display Modes | |
|
|