![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#5
|
|||
|
|||
![]()
On Tuesday, September 10, 2019 at 2:30:54 PM UTC-4, Bob Kuykendall wrote:
On Tuesday, September 10, 2019 at 10:11:32 AM UTC-7, Chris Snyder wrote: We just noticed some play on our club L-23. It was detected in the stick while on tow with a forward CG. Does anyone have experience with a horizontal stab being loose on an L-23? The elevator auto-hookups have large pins, but it seems like there's no way to really tighten anything... You should probably take any looseness in the elevator drive or horizontal stabilizer attachment quite seriously. Can you describe the play more precisely? Is the play in the elevator actuation, or in the horizontal stab attachment? --Bob K. Word from Blanik America is the MM provides the tolerance for how much movement is acceptable, so we're going to measure that tonight. The play is in the stab attachment. Apparently there are a few sources that can cause this. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
stowing horizontal stabilizer on tail boom in trailer | [email protected] | Soaring | 24 | June 19th 19 07:47 PM |
Scheibe SF-25 Motorfalke horizontal stabilizer and other parts needed | [email protected] | Soaring | 7 | January 25th 17 05:51 PM |
Looking for a Libelle Horizontal Stabilizer | J Wahl | Soaring | 1 | May 2nd 15 05:01 AM |
G-103 horizontal stabilizer airfoil section ? | [email protected] | Soaring | 3 | November 23rd 08 04:30 AM |
WTB: 1-34 Horizontal Stabilizer | Jeremy Zawodny | Soaring | 1 | October 15th 04 05:12 AM |