![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
....why our Lycoming engines call for 12 (or 8) quarts of oil, when they blow
out anything over 8 (or 6) quarts? My old A&P, a real gray head with decades of aviation experience, mentioned the reason to me in conversation today. Here's the poop: When Lycoming was certifying these engines, they had to prove that they could operate them for "x" number of hours at full throttle. (The number bandied about was in the hundreds of hours, but no one knew for sure.) Lycoming was not allowed to add oil to the engine during this certification operation. Obviously, in order to run at such high power settings for so long, you're gonna need a lot of oil. Thus, the sump on my O-540 was designed to hold 12 quarts, while the sump on my old O-320 held 8 quarts. This ensured that they would pass the certification test. However, since they were certified with these over-sized oil sumps, that became the only way they could be built and sold. This despite the fact that anything over 8 and 6 quarts, respectively, ends up painting the belly of our planes in normal operation... So now you know...the *rest* of the story.... ;-) -- Jay Honeck Iowa City, IA Pathfinder N56993 www.AlexisParkInn.com "Your Aviation Destination" |
Thread Tools | |
Display Modes | |
|
|