|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#17
January 16th 04, 05:53 PM
|
|||
|
|||
"G.R. Patterson III" wrote in message ... Jim Weir wrote: Does anybody have an idea on how to make a tiny little vacuum pump on the order of an aquarium pump or so that will draw just a few inches of water? Preferably 110, but I can rig up a 12 volt supply if necessary. Go to http://www.sportsmansguide.com and enter item number WX2-70392 in the search window. You should see a window for a air mattress pump that runs on four D-cells. It has three inflator fittings which are attached to a lanyard. I found a similar device at the WAL*MART made by Coleman. It has a internal rechargeable battery. 
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wet vs Dry Vacuum Pump | Fastglasair | Home Built | 1 | December 15th 04 05:17 PM |
| Windmilling Prop & Vacuum Pump | Matt Young | Instrument Flight Rules | 14 | October 14th 04 08:08 PM |
| Remove oil seal from vacuum pump adapter on Lycoming IO320 HOW????? | Ron | Home Built | 2 | February 24th 04 04:34 PM |
| Tiny vacuum pump | Jim Weir | Home Built | 41 | January 24th 04 05:42 AM |
| Battery and Vacuum pump | PaulaJay1 | Owning | 3 | January 16th 04 04:22 PM |
Threaded Mode