Tiny vacuum pump

On Mon, 19 Jan 2004 17:45:27 -0500, Mike Patterson
wrote:

On Sat, 17 Jan 2004 19:03:40 GMT, Tom Pappano
wrote:

Jim Weir wrote:
Does anybody have an idea on how to make a tiny little vacuum pump on the order
of an aquarium pump or so that will draw just a few inches of water? Preferably
110, but I can rig up a 12 volt supply if necessary.


Just get a little "mityVac" hand pump used for testing vac advance etc
on cars.
Or if you really need it mechanized, make an adapter for your vacuum
cleaner with an adjustable bleed

The reason I say this is that I'm getting ready to pack a fairly large number of
bags with used but serviceable engine parts (valves, pistons, etc.) and I'd like
to put each part in a "baggie" (sandwich bag or equivalent) along with a little
preservative oil, and then suck the baggie down with a football needle stuck
into the top closing mechanism just before sealing.

Thoughts?

Jim
Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com


Those aquarium air pumps pull air from around the case.

How about placing one inside a cheapo tupperware-type container with a
"suck" port mounted on the container, you'd also need to run a "blow"
port from the pump's normal output through the container wall.

HTH


Mike Patterson
Please remove the spamtrap to email me.