![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#7
|
|||
|
|||
![]()
As hokey as it sounds, my first criteria is the condition of the shop floor.
The shop which does my work has two hangars both with pristine white floors. The shops I didn't choose have dirty unpainted floors. I believe there's a correlation between clean/neat facilities and competent work, but maybe I'm just fooling myself. I also reviewed the comments on airnav. It's sometimes hard to tell a shill from a real customer but I found the comments to be fairly accurate. And once you find a shop, post it here, you'll likely find someone who's been there before. You can also ask other owners at your home base. Most are fairly candid about such things. When I made my choice, I was lucky enough to do a trial with some simple maintenance (if something major breaks you may not have this option): I got an oil change and a strut refilled, and also talked to the mechanic about some plug fouling issues. My chat with the mechanic convinced me that this was a competent individual whom I could rely on in the long term. To be honest, though, I don't think you can really know until your first annual, which is a sort of test of how thorough your mechanic is. Finally, I resolved to become more knowledgable about my aircraft. I joined a type club, acquired the parts and maintenance manuals, and did some independent research each time I had a squawk. I suggest you do the same, regardless of where you get your maintenance done. You'll feel much better if you can do some high-level problem determination on your own and compare with what the shop wants to do to the plane. A type club is also great for guessing where your next problem might be, and provides some hints as to what your mechanic should be looking for. best of luck, mark "O. Sami Saydjari" wrote in message ... OK, I have a controversial question. How does one find a good A&P mechanic. I just bought a Piper Turbo Arrow III recently and I want to find a mechanic in my area (Central Wisconsin) that I can trust and is competent. I am interested in hearing about how folks find the good A&Ps out there, other than by pure luck. I have had a couple of disappointing experiences with A&Ps where they missed some pretty significant problems. I found one through word of mouth. The other, well, I found the closest Piper Service Center near me (figuring that they had special knowledge and expertise with Pipers -- turned out to not be so). -Sami |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Free Volksplane to good home, located in Chino Hills CA | Bryan Zinn | Home Built | 3 | July 18th 04 02:55 AM |
looking for good brake master cyls for homebuilt. | clare @ snyder.on .ca | Aviation Marketplace | 0 | March 28th 04 05:13 AM |
New novel and it's a good one | Lone Eagle | Military Aviation | 7 | October 2nd 03 04:13 AM |
they took me back in time and the nsa or japan wired my head and now they know the idea came from me so if your back in time and wounder what happen they change tim liverance history for good. I work at rts wright industries and it a time travel trap | tim liverance | Military Aviation | 0 | August 18th 03 12:18 AM |
Commander gives Navy airframe plan good review | Otis Willie | Military Aviation | 0 | July 8th 03 09:10 PM |