A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Thoughts on a 1966 Cessna 172G?



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old April 8th 04, 04:58 PM
Malcolm Teas
external usenet poster
 
Posts: n/a
Default

Jim Weir wrote in message . ..
The Mark-12s are going to be a problem. If you are talking about the original
vacuum tube design (12, 12A, and 12B) with the monster power supply sitting back
aft of the hatrack in the empennage, they are FCC illegal last time I looked


Thanks Jim and GR. I got lucky. Turns out they're the TKM MX 12
NAV/COMM with glideslope, it's an OEM replacement for the old Mark 12s
I gather. I got that from the panel picture and matching with catalog
pictures. There's two radios, which is always nice.

The transponder appears to be a Narco AT 155 or very simiilar (again
judging from pictures). The intercom was replaced in February.
That's it for the electronics, no DME, GPS, or even ADF.

The VOR heads are older as they've got the blue and yellow areas on
the bottom of the dial.

As to the airframe, the ADs are few and relatively inexpensive to comply with.
The most expensive one that comes to mind was the nose gear fork that should
have been replaced twenty+ years ago or better.


Nice to hear! I want to get a good look at the log books this weekend
and will check that.

If you have a friendly IA with the computer disk, ask them to run you a computer
printout of the AD list...they will need to know what mags are on the unit,
which prop, which carburetor, etc..


Ok, working on getting the info. I'll be able to get it this weekend
definately. I'm told it's all up to date except for the pitot-static
inspection which has lapsed.

If you DON'T have a friendly IA, I will run you a list and give it to you in
pdf IF you can supply me the accessories list as above. I'd also ask the owner
for the current equipment list, check it against the current weight/balance,
then look to see what is on the airplane that isn't on the equipment list.


Ok, I'll check on the equipment. I think I know someone locally, if
that doesn't work out I'll email you. I appreciate the offer! I
would need to find someone to do a pre-buy with around here in any
case.

-Malcolm Teas
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1/72 Cessna 300, 400 series scale models Ale Owning 3 October 22nd 13 03:40 PM
1966 Cessna 172 Control Yokes --- What Alloy? jls Home Built 0 November 4th 04 05:02 PM
FORSALE: HARD TO FIND CESSNA PARTS! Enea Grande Aviation Marketplace 1 November 4th 03 12:57 AM
FORSALE: HARD TO FIND CESSNA PARTS! Enea Grande Owning 1 November 4th 03 12:57 AM
USAF = US Amphetamine Fools RT Military Aviation 104 September 25th 03 03:17 PM


All times are GMT +1. The time now is 03:28 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.