If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#10
|
|||
|
|||
On Wed, 20 Oct 2004 at 14:31:01 in message
, Joe Morris wrote: A friend of mine was one of the design engineers for the 747; he has a film of some of the certification test flights -- including abused takeoffs where intentional overrotation caused the tail to contact the runway surface...and at gross weight (IIRC) it successfully completed the takeoff. I think you will find that is a standard test to check the 'Velocity Minimum Unstick' speed. A large block of wood (Usually Oak) is fastened to the tail bumper to protect the airframe. It is not abuse but a careful test at the Maximum practical rotation. Unless the tail has been definitely touching for about the last 500 ft of the ground run the test is not accurate. For a description of this test see "21st Century Jet" by Karl Sabbach regarding the Boeing 777. -- David CL Francis |
Thread Tools | |
Display Modes | |
|
|