Procedure turn required?

On Mon, 06 Jun 2005 16:53:15 GMT, "Lakeview Bill"
wrote:

I have to take issue with your statement:

Fair enough, I'm willing to learn - education is always ongoing.

But take another look at what the AIM actually says:

"A procedure turn is the maneuver prescribed when it is necessary to
perform a course reversal..."

As I read this, it is saying:

If a course reversal IS required, it must be done via a procedure turn.

If a course reversal IS NOT required, a procedure turn IS NOT required.

.It appears that the intention is to specify the METHOD THAT MUST BE USED if
a course reversal is required, not to require a procedure turn under all
circumstances...

But they specifically enumerate the conditions when procedure turns
are not required, the list being vectors to final, NoPT segment, timed
approaches, or when not authorized.

So, "pilots shall execute the entire procedure commencing at an IAF".
If the entire procedure, which therefore only starts when crossing the
IAF, requires a procedure turn because you're not covered under the
exceptions, it seems that by not executing a procedure turn (in the
case of a straight-in crossing a racetrack to the barb side would
suffice), you're not in fact flying the entire procedure as required,
you're flying it as if you got vectors to final just because you were
generally lined up on the inbound course while crossing the collocated
IAF/FAF and have elected not to fly the intermediate segment of the
approach, going right to just flying the FAF-MAP segment, right?