KLN94 GPS and flying "overlay" GPS approaches

"Sam Spade" wrote in message news:Tpwmg.34487$AB3.587@fed1read02...
Kyprianos Biris wrote:

How do you switch it into SUSPEND mode ?

Regards


I can only speak to the Garmin 400/500 series. SUSPEND is built into
the nav database by Garmin for an approach. At a minimum, there is
SUSPEND for the missed approach point. It is cleared by hitting the OBS
button.

Other times SUSPEND occurs:

1. At a course reversal hold, SUSPEND lasts for one circuit in the hold.

2. At a published missed approach hold, SUSPEND lasts indefinately until
cancelled.

3. SUSPEND can occur more than once for a missed approach, such as where
an altitude has to be achieved before a turn can be made (example KJAC
ILS 19)

Kyprianos asked how to switch *into* "suspend" mode, not *out* of it.
I don't have access to a KLN94, so I can't answer his question, either.
But on my CNX80, the "SUSP" button toggles into and out of the "Suspend" mode.

Furthermore, the CNX80/GNS480 does not automatically "suspend" at the MAP.
If the aircraft doesn't land, the missed approach continues to sequence.