A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Hail damage - loss of value?



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old August 11th 06, 04:03 PM posted to rec.aviation.owning
Howard Nelson
external usenet poster
 
Posts: 19
Default Hail damage - loss of value?


"Nathan Young" wrote in message
...
On 9 Aug 2006 16:23:00 -0700, wrote:

My Beech Sundowner sustained some hail damage a few weeks ago. About
15 planes on the ramp (IJD) were hit. I have a fist sized hole in one
wingtip and all the control surfaces are dimpled. There's a few on the
wing tops and fuse top, but you really have to look in the right light
to see them. Tail cone and stab tips also show light damage.

What's a real shame is this plane didn't have a mark on it. Had been
painted about 4 years ago and looked real sharp. But the reality is,
aside from the wingtip, you don't notice the dimpling, I'd say most of
it is light to moderate - perfectly airworthy.

My A&P is doing up an estimate now and is guessing about 15K, which
includes reskinning all the control surfaces. Insured hull value is
46K.


$15k probably is a good estimate.

$10k for a new paint job with all the bondo work to fill the hail
dents on the body and wings.


Bondo???? I am not being sarcastic. Is this crap actually used in aircraft
repair?
10K sounds about right for decent paint job without sheet metal repair.

$5k to reskin the ailerons, flaps, and elevators is light, but not out
of the ballpark.


I had to reskin one aileron on a 182 and 5K to reskin, paint and balance all
control surfaces seems pretty inexpensive. My understanding from the
original post was that the $15K was for reskinning control surfaces which
seems about right.

If the work is done correctly, the plane will look better out of the
shop than it did before the hail. This should help offset the value
of having reskinning entries in the logbook.

-Nathan

Howard


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
UAV's and TFR's along the Mexico boarder John Doe Piloting 145 March 31st 06 06:58 PM
I want to build the most EVIL plane EVER !!! Eliot Coweye Home Built 237 February 13th 06 03:55 AM
Most reliable homebuilt helicopter? tom pettit Home Built 35 September 29th 05 02:24 PM
Mini-500 Accident Analysis Dennis Fetters Rotorcraft 16 September 3rd 05 11:35 AM
Towing Roger Fowler Soaring 6 August 11th 05 04:25 AM


All times are GMT +1. The time now is 12:21 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.