A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Flying on the Cheap - Wood



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #20  
Old August 18th 06, 03:42 AM posted to rec.aviation.homebuilt
Roger[_4_]
external usenet poster
 
Posts: 677
Default Flying on the Cheap - Wood

On 16 Aug 2006 10:43:03 -0700, "Bret Ludwig"
wrote:


Roger wrote:

airplane is quite a misnomer. Which is the reason why, IMHO, one
should not recommend that a homebuilder use an engine that has
never, or almost never flown successfully. If the homebuilder is a
genuine gearhead, they'll already have their own ideas, if not, they
ought to avoid breaking new ground unless or until they become
one.


If you aren't a "gearhead" why the hell are you thinking about
BUILDING AN AIRPLANE????

It's cheaper?? It isn't.


Cheaper? Are you kidding? By the time I finish the G-III (If I ever
do) I'll have more than twice the price of the Deb in it and that is
going with a used engine and prop.



In other words you could have bought a T-6 or an L-39 when you
started and they would now be worth much more than the G-III (I assume
by G-III you do not mean what averyone else I know means by a G-III-a
large Grumman with two turbofans used to haul VIPs and train Shuttle


Any one except those that build their own airplanes. :-))

Actually I could have purchased a relatively low time, very nice L-39
with a brand new (spare) engine still in the can for what I paid for
the Deb or what I have in the G-III. The T-6s were about double that
price back then.

As for wood I'd think, which means I don't know for sure, that pallets
and shipping containers which may look rough, probably have better
wood in them than the stuff we purchase to put into homes now days.
The crate my G-III came in is far better wood than I can find at any
of the local lumberyards except the one that mills the stuff when you
order it. There is a *slight* difference in price.:-))

I should have kept the Ash tree that died in the front yard. It was
out by the power lines so the power company came out, trimmed it and
left me with a 20 foot tallt, stump about 2' across at the base and
over a foot at the top, that must have weighed well over a ton. Man
but that was some dense stuff. OTOH it's a crime to even ship, or
move dead Ash from one location to another around here. (courtesy of
the "Emerald Ash Borer")

Roger Halstead (K8RI & ARRL life member)
(N833R, S# CD-2 Worlds oldest Debonair)
www.rogerhalstead.com

pilots on approaches.)

Roger Halstead (K8RI & ARRL life member)
(N833R, S# CD-2 Worlds oldest Debonair)
www.rogerhalstead.com
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie Qs on stalls and spins Ramapriya Piloting 72 November 23rd 04 04:05 AM
Wanted: VFR Safety Pilot near Milwaukee, WI - Cheap flying for you Paul Folbrecht Instrument Flight Rules 9 September 16th 04 03:25 AM
Ultralight Club Bylaws - Warning Long Post MrHabilis Home Built 0 June 11th 04 05:07 PM
FA: WEATHER FLYING: A PRACTICAL BOOK ON FLYING The Ink Company Aviation Marketplace 0 November 5th 03 12:07 AM
the thrill of flying interview is here! Dudley Henriques Piloting 0 October 21st 03 07:41 PM


All times are GMT +1. The time now is 10:59 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.