![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#9
|
|||
|
|||
![]() "Juan Jimenez" wrote ... "Richard Isakson" wrote ... Warning!: From what Juan has written on this newsgroup, he hasn't been able start his engine in a Year and a half. The engine was just reassembled after an injector inspection showed several of them were partly clogged. They were inspected in Idaho and the engine is now reassembled. Juan, It's good that you found a problem that may get your engine running again but aren't you missing something? If your engine truly is "new", then all that injector clogging happened in just a brief ten hours. There must be an underlying systems problem that caused the clogging. Have you found that problem? If not it will just re-occur in the next ten hoursof running time. Have you informed any potential buyers that they are going to have to pull the engine every ten hour to clean the injectors? Rich |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
AOPA Stall/Spin Study -- Stowell's Review (8,000 words) | Rich Stowell | Aerobatics | 28 | January 2nd 09 02:26 PM |
Commerical rating question about hours req. | Nik | Piloting | 5 | September 12th 06 05:43 AM |
Most reliable homebuilt helicopter? | tom pettit | Home Built | 35 | September 29th 05 02:24 PM |
First 2 1/2 hours PPL(H) today! | Simon Robbins | Rotorcraft | 42 | September 25th 05 12:54 AM |
millionaire on the Internet... in weeks! | Malcolm Austin | Soaring | 0 | November 5th 04 11:14 PM |