![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
On Feb 3, 12:10�pm, "Kilo Charlie" wrote:
wrote in message oups.com... If your thinking of going to Ely, Nv. this summer, their are changes. Due to homeland security, no more gliders or people are allowed in the terminal/ ramp area, including the covered patio area. *Also, the concrete pads we used, are off limits. A new area, where we can keep our rv's with our gliders, is mid-field and west of the main runway 18-36. *A entrance to that area is a dirt road north of the main terminal. You might want to stop, before you head over to the new area and check in with Carl Herold, or call him, he's at El Aero. They will have a new webpage shortly. He is now managing the glider and tow operations. These changes are because of homeland security and the new comuter airline serving the area. The new aera is good, as we can be near our trailers, they also will have a 5,000 gal. water truck for us, where our new area is at. Also, a new tie down cable is installed, so if you wish to tiedown you can, and park right by your glider. Its the old mid-field paved runway, running east to west, from runway 18-36. When you now land, you will be able to taxi off the active, and get on to our tiedown area. Their is a new airport manager, I met him late last summer, and he seems interested in our needs. Thats good. Thermal tight, Soar high, Fly safe, # 711 reporting. Thanks for the update Tom. *This is somewhat concerning to me since I don't see this as anything but another excuse to treat the glider community as second class. On the one hand I like the idea of not having to worry about dealing with the powered traffic on the ramp but wonder if they are not allowing any powered pilots to operate off of the same area. *Me thinks that the powered guys have no change in their ops. *This change would then be purely discriminatory and bodes poorly for continued glider ops (other side of the airport or not) at Ely. I have a hangar (where three glider trailers are housed) at the 17th busiest airport in the US (KDVT) and fly powered out of there as well. *There is a card controlled gate but there are no limitations re cars, aircraft type, or people being on the tarmac where there are routinely multiple large bizjets (G4's etc) on the ramp which is what I assume the paranoid fringe is worried about someone taking. *Maybe the new airport manager is from Boston? *;-) Anyone that has been to Ely knows that the fence around it is not secure so the idea of this type of restriction is a farce to begin with. *I'm happy to hide when the commuter flight is there but beyond that its simply discrimination. *I appreciate Carl's tenacity in dealing with it all. Ely is a special place and it would be real shame to be pushed out of there. As long as I can get a tow I'll be back every July! Casey Lenox conspiracy theorist Phoenix- Hide quoted text - - Show quoted text - Sometimes change can be better. Where we will be at, with the gliders, we won't have power traffic blowing rocks and dirt all over us. Also, the taxiway we will use to get our gliders staged, we needn't worry about the power traffic taxing out. So, theirs maybe more good than not. Even when you used the concrete pads, them big things with those huge blades, called whirlybirds, golly greens, won't be near our area when they come in to fuel and blow stuff all over us. Growth does cause change, but overall I am glad they did think of us, and it should be as good or better than it was. I do like the idea of having my motorhome right their next to my trailer. After a Great Basin flight in Ely, my old 27 would giggle at night, when she was in her trailer, and I would seldom here her. Now, my 29 will be closer, and I will be able to hear those giggle's more often............. # 711. |
Thread Tools | |
Display Modes | |
|
|