![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#9
|
|||
|
|||
![]()
On Sun, 14 Sep 2003 23:53:18 +0000, Dave Hyde wrote:
Kevin Horton wrote: Just another example of the errors in indicated airspeeds at high angles of attack. You're more generous than I. Performance numbers, particularly at low speed/high AOA, presented in terms of *indicated* airspeed are useless. Dave 'position error' Hyde Yeah, it is amazing how many people don't understand that. Up here in Canada we have a class of aircraft called Advanced-Ultralights. Sort of a Piper Cub class of aircraft. The responsibility for the design standards was handed to the Transport Canada Maintenance and Manufacturing folks (i.e. A&Ps). I think the powers that be figured the folks who are responsible for all the Type Certificated aircraft design standards (i.e. Aircraft Certification) were philisophically incapable of writing a "simple" design standard. Anyway, the Advanced-Ultralight design standards require a stall speed of 39 kt Indicated Airspeed or less. Indicated Airspeed. Amazing. I betcha I could get a 747 to stall at 39 KIAS if you let me mess around with the location of the static ports and the locatation and orientation of the pitot tube. When I was working on the Diamond DA-20-C1 program, Diamond spent a long time trying to fine tune the pitot-static system. They had a good system on the DV-20, but they had made a change in the spar design which forced them to move the pitot-static tube. They decided on a location and then messed around with the angle on the bottom of the Piper type pitot-static tube. One of the variations they tested indicated about 10 kt low at the stall and about 20 kt high in cruise. We joked about selling that pitot-static tube as a high-performance option. -- Kevin Horton RV-8 (finishing kit) Ottawa, Canada http://go.phpwebhosting.com/~khorton/rv8/ |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
My introduction and 4 seater kits | LFOD76 | Home Built | 18 | July 25th 03 09:36 AM |
STOL and aerobatic? | Dave Hyde | Home Built | 1 | July 19th 03 02:46 AM |
STOL and aerobatic? | Bushy | Aerobatics | 0 | July 18th 03 01:10 PM |